Like any machine, motorcycles also function at its optimum, if you undertake timely servicing and repairs. Comparatively easy to maintain, a motorcycle can give you hassle-free service now and in future, provided you take care of the smallest problems without any delay.
One of the ways to check for the smallest malfunctioning is to go for a pre-ride inspection. A pre-ride inspection is a must before you take your bike out for long rides, or even after you have taken it out after storage during winter months. This way, you will become aware of any small issue before it multiplies into something big and costly. Here is information about the most common and quick pre-ride inspection. It is called the T-Clocs Test.
T: This alphabet stands for Tires and Wheels. Air pressure, brakes and threading of tires should be checked for possible cracks, dents or any loose spokes. Don’t forget your bike stands and rides on these important parts.
C: This stands for Controls. Ensure that levers, switches, cables, hoses and all other control mechanisms are in immaculate condition before you undertake any journey.
L: This stands for Lights and Electrical System. Ensure that these are in good condition for safety reasons.
O: Oil and Other Filters. Are the levels alright? Are there any leaks? Check thoroughly for any small repairs which might have to be done.
C: Chasses. Make sure that there is no problem with the suspension of the vehicle and the drive belt is in superior condition.
S: Ensure that the Sides Stand is in proper condition.
Incidentally, the time taken for such pre-ride inspections does not take more than 3 to 5 minutes. Yet, if you do this regularly before every ride, it can not only ensure safety but also prevents any big damage to your bike where you might have to spend a lot of money in repairs.
Over and above this daily pre-ride inspection, it is advisable to take your bike to any certified or authorized motorcycle inspection outlet once every year. A detailed inspection is mandatory according to State law. This inspection guarantees safety for you and other drivers on the road.
While every State has different sets of rules for the annual motorcycle inspection, some rules are common. The following parts of the bike should be in perfect working condition before the vehicle hits the road:
* Headlights.
* Rear view mirror.
* Horn.
* Hand and foot brakes.
* Exhaust system.
* Rear number plate.
* Number plate light.
* Tires/treads.
* Hand holds.
* Proper sidecar installation and safety lighting.
With regard to monthly or quarterly motorcycle maintenance, it is recommended that you read the owners’ manual supplied by the motorcycle manufacturer which may contain specific instructions for specific parts, like oil changes, lubrication procedure, checking tire pressure after a certain mileage and so on. Every manufacturer specifies a separate set of maintenance instructions which must be rigorously followed. Moreover, regular maintenance of your bike ensures that your bike provides optimum performance and safety for a long period of time which can also save you precious dollars in repairs and overhauling.
Source:- http://www.motormaven.com/Motorcycles/Importance-of-Motorcycle-Maintenance.html
Importance of Motorcycle Maintenance